PCI LVDT/RVDT Measurement & Simulation

PCI LVDT/RVDT Measurement & Simulation

Model PCI/PCIe 76CL1

PCI LVDT/RVDT Measurement & Simulation

The 76CL1 is a PCI LVDT/RVDT Measurement and Simulation Board that provides eight LVDT/RVDT Measurement Channels and six 3/4-Wire (or Twelve 2-Wire) LVDT/RVDT Stimulus outputs, that can be used in single-speed or two-speed modes. It provides wrap-around self-test, optional Programmable Reference Supply, and is available for Military or Commercial applications.

This product is Obsolete. Please view our Obsolescence Policy for additional information. For new applications, please refer to the 76CS3 product page for details on the closest replacement product.


  • 16-bit Resolution
  • Continuous background BIT testing with Excitation and Signal loss detection
  • Automatically supports either 5 V or 3.3 V PCI bus
  • Transformer isolated
  • 4, 8 and 12 (2 wire) Stimulus channels or 2, 4 and 6 (3 or 4 wire) Stimulus channels available to mix with 4 or 8 (2, 3, or 4 wire) Measurement channels
  • Auto-ranging input between 2.0 and 28 Vrms
  • Self-calibrating. Card removal NOT required.
  • 360 Hz to 10 kHz operation
  • LATCH feature for Measurement
  • ON/OFF for Stimulus (D/L) Channels
  • Stable output with temperature
  • Watchdog timer and soft reset
  • No adjustments or trimming required
  • Commercial or Extended Temperature
  • Part number, S/N, Date code, & Rev. in nonvolatile memory
  • Windows 98/2000/NT, LabVIEW and Linux supported
  • Graphical User Interface



Click here for MathWorks xPC Target 2.5 software




Note: Linux Driver(s): All Linux driver / source code are provided as is without change support.