Digital-to-Analog

 

See DA-X for newest architecture.

For Multifunction embedded boards, 10 Digital-to-Analog (D/A) channels (Modules F1, F3, J3, J5) or four High Current Digital-to-Analog (D/A) channels (Module F5) are provided per module and includes extensive diagnostics. Overloaded outputs will be detected, with the results displayed in a status word. This module incorporates major diagnostic capabilities that offer substantial improvements to system reliability because user is alerted to malfunctions within 5 seconds. The system includes D/A FIFO Buffering for greater control of the output voltage and signal data. The FIFO D/A buffer will accept, store and output the voltage once enabled and triggered, for applications requiring simulation of waveform generation. Module J8 provides four High Voltage D/A channels per module and includes extensive diagnostics. The output data command word is formatted as a percentage of the Full Scale (FS) range selection which allows for maximum resolution and accuracy at lower voltage ranges. Overloaded outputs will be detected, with the results displayed in a status word. This module incorporates major diagnostic capabilities that offer substantial improvements to system reliability because user is alerted to malfunctions within 500 milliseconds.

 

Click below for manuals and specifications:


ModuleDescriptionManual
F1Ten D/A Outputs (+/-10 VDC)Contact Factory at 1 (631) 567-1100
F3Ten D/A Outputs (+/-5 VDC)Contact Factory at 1 (631) 567-1100
F5Four D/A High Current Outputs (+/-20 VDC at 100 mA)Contact Factory at 1 (631) 567-1100
J3Ten D/A Outputs (+/-1.25 VDC)Contact Factory at 1 (631) 567-1100
J5Ten D/A Outputs (+/-2.5 VDC)Contact Factory at 1 (631) 567-1100
J8Four D/A High Voltage Outputs (+/-20 to +/-80 VDC)Contact Factory at 1 (631) 567-1100

Function module(s) featured in products below:


ModelBoard TypeFunction Module SlotsBoard ArchitectureSizeOn Board ReferenceEthernetOtherMaster / Slave
76C2PCI3 1/2N/A    
64C3VME6BF533 / Cyclone® III Y2 x Gb Both 
64C2VME 6BF533 / Cyclone® II Y1 x Gb Slave 
64CS4VME5BF533 / Cyclone® II Y1 x GbHigh power D/S capableSlave 
76CS3PCI5 FullY High power D/S capable  
79C3PCIe3 1/2N/A    
75C33U cPCI2 + 1/2S/B Cyclone® II  1 x Gb Slave 
75C53U cPCI2 + 1/2BF533 / Cyclone® III  1 x Gb Both 
78C26U cPCI6BF533 / Cyclone® II Y1 x GbHigh power D/S capableSlave 
78CS26U cPCI5BF533 / Cyclone® II Y1 x Gb Slave 
67C36U OpenVPX6BF533 / Cyclone® III Y2 x Gb Both 
68C33U OpenVPX2 + 1/2BF533 / Cyclone® IV  2 x Gb Both 
ModelBoard TypeProcessorFunction Module SlotsMaximum MemoryMaximum StorageVideo OptionsEthernetAvailable O/S
75SBC43U cPCI SBCNXP® QorIQ® P2041 Quad-Core e500mc Processor @ 1.2 GHz14 GB DDR3 SDRAM32 GB SATAII NAND FlashN/A2 x GbWind River® Linux or VxWorks®
ModelPhotoBoard TypeDimensions w/Connectors (w x h x d)Volume w/Connectors (in3)Weight / lbs (fully populated)Est. Typ. Power Dissipation (W)# of Board SlotsFunction Module SlotsMax I/O PinsEthernet
SIU66U VME11.75" x 3.35" x 8.65"340.49<14.012 to 60 W2123162 x Gb
ModelFunctionVoltage RangeFrequency RangeExcitation / Reference SupplyNumber of ChannelsOther
65DA2-55Digital-to-Analog (DC) Outputs±10 VDC or ±16.3835 VDCNot ApplicableNot Available125410C-55-3 Replacement