VME Relay Driver

Model VME 64SW2

This single slot card incorporates thirty two (32) 2A isolated high current drivers, high-side switched outputs with short circuit protection and extensive diagnostics. Wrap-around testing continuously monitors each channel for short circuit, unconnected loads, missing loads and for shorted channels. Any failure will trigger an interrupt within 5 seconds of channel diagnostic completion. The card is divided into two groups of 16 channels that can be independently powered up or down. VME interface power is opto-isolated from the switched external power.


Platform: VME
Function(s): Relay Driver
Category: Embedded I/O Boards / VME Boards
Documents: View
Software: N/A

Features
  • Short circuit protected
  • 32 channels in two groups of 16 each
  • Soft turn-on and turn-off
  • Watchdog timer and soft reset
  • Conforms to ANSI/VITA 1.1-1997 VME64 extension
  • Conforms to VITA 1.-1994
  • ESD protected to IEC 1000-4 Level 2
  • Sense unconnected loads
  • Geographical addressing
  • Part number, S/N, Date code, & Rev. in non-volatile memory
VME Relay Driver

See Larger Image
 
 


Document DownloadsRelease Date
64SW2 Specification / User's Manual
09/18/2007
VME Board Addressing Sheet
02/13/2009
VME Mechanical Outline Drawing
03/18/2008
Environmental Specifications for cPCI and VME cards
06/04/2010
Quick Start Software Guide
02/13/2009