I/O Board Wizard

VME D/S, S/D & Multifunction I/O

Model VME 64CS4

The 64CS4 is a single slot Multifunction 6U VME Board for applications requiring Digital-to-Synchro/Resolver (D/S) stimulus output, as well as I/O and Communication functions. The 64CS4 provides up to ten separate D/S channels with multiple programmable features. The “mother board” contains 5 independent module slots, each of which can be populated with a function specific module. The card can be configured for 10 D/S channels, or D/S in combination with A/D, D/A, Discrete I/O, TTL I/O, RTD, LVDT, S/D, RS232/422/485, CANBus, MIL-STD-1553 and ARINC429. This unique design eliminates the need for specialized, single function cards by providing a broad assortment of functions on one single card that can be controlled via VME or 10/100/1000BaseT Ethernet port.


Platform: VME
Function(s): Multifunction
AC Reference Supply - Board
Analog-to-Digital (A/D)
ARINC 429
CANBus
Digital-to-Analog (D/A)
Digital I/O - Differential Transceiver
Digital I/O - TTL/CMOS
Discrete I/O
LVDT / RVDT Measurement Boards
LVDT / RVDT Simulation Boards
MIL-STD-1553B
RS232 / RS422 / RS485
Resistance Temperature Detector
SSI / Encoder / Quadrature Counter
Synchro / Resolver Measurement Boards
Synchro / Resolver Simulation Boards
Category: Embedded I/O Boards / VME Boards
Documents: View
Software: View

Features
  • Multiple functions on a single slot VME card
  • User can specify five different function modules.
  • Automatic background BIT testing continually checks and reports health of each channel.
  • Control via VME or Ethernet
  • Multi-speed ratios between 2 and 255 are programmable.
  • FIFO Buffering/Trigger (select modules).
  • Optional onboard 5 VA programmable reference supply.
  • The Stimulus channels offer short circuit protection and the ability to ground one of the outputs without effecting performance.
  • Ambiguity circuits maintain monotonic outputs by compensating for misalignment between the Coarse and Fine Synchros
  • Connections via front panel, rear connector, or both.
  • Designed for both Commercial and MIL applications.
  • Convection and Conduction cooled versions.
  • Software Support Kit and Drivers available.
VME D/S, S/D & Multifunction I/O

See Larger Image
 
 


Document DownloadsRelease Date
64CS4 Specification
07/15/2010
NAI Ethernet Interface for Embedded IO Boards Specification
07/19/2010
64CS4 Data Sheet
07/15/2010
64CS4 Operations Manual
07/12/2010
VME Board Addressing Sheet
02/13/2009


Software DownloadsRelease Date
VME 64CS4 Linux 2.4 Software Support Kit
11/16/2009
VME 64CS4 VxWorks Software Support Kit
11/16/2009
Configuring IP Configuration for Ethernet Supported Boards
09/23/2009
Note: Linux Driver(s): All Linux driver / source code are provided as is without change support.