Products -> Synchro / Resolver Measurement

Synchro / Resolver Measurement

The Synchro/Resolver (S) Module provides four programmable measurement channels. It features 16-bit resolution (with up to 24-bit resolution for the two-speed configuration), and a single speed accuracy of 1 arc-min. For two speed applications, the overall accuracy is calculated by dividing the accuracy of the fine channel (1 arc-min) by the gear ratio. This S/D measurement design has the capability to automatically shift to higher bandwidths when high acceleration events are encountered. There is no data latency. The shifting is smooth and continuous with no glitches. Tracking rates are only limited to bandwidth restrictions, up to 190 RPS, at 16-bit resolution. Both a software and hardware LATCH feature is provided to permit the user to read all channels at the same time. Reading will unlatch that channel. The angle alert monitors each channel for the programmed angle difference and sets an interrupt, if enabled, as soon as that threshold is reached. Thus, no polling of the angle registers is required until an angle has reached the specified difference. The use of Type II servo loop processing techniques enables tracking up to the specified rate, at full accuracy. A step input will not cause any hang-up condition. Intermediate transparent latches, on all angle and velocity outputs, assure that valid data is always available. Our synthetic reference compensates for ±60° phase shifts, thus eliminating the need for individual compensation networks.

S/D (Module S*) - Four Synchro/Resolver Measurement Channels

VME Multi-function Next Genera...	6U cPCI Multifunction I/O & Co...	PC/104 Synchro/Resolver Measur...
The 64C3 is the next generation single slot, 6U VME, low-power/high-performance, multi-function I/O board. Configured with up to six... More...	The 78C2 is a 6U cPCI Multifunction I/O and Communications Board. The “mother board” contains 6 independent module slots, each of... More...	The 73SD4 is a DSP based, PC/104 compliant stack-through module. It offers six (6) separate isolated Synchro/Resolver-to-Digital... More...


PCI Multifunction I/O & Commun...	PMC Synchro/Resolver Measureme...	PMC Synchro/Resolver Measureme...
The 76C2 is a Multifunction PCI I/O and Communications Board. The “mother board” contains 3 independent module slots, each of which... More...	The 74SD3 is a conduction cooled PMC Synchro/Resolver Measurement Board that provides eight (8) single-speed or four (4) two-speed... More...	The 74SD2 is a convection cooled PMC Synchro/Resolver Measurement Board that provides eight (8) single-speed or four (4) two-speed... More...


VME Multi-function I/O & Commu...	VME, Multi-function, High Dens...	VME, SBC w/Multi-function Comm...
The 64C2 is a single slot, 6U VME Multi-function I/O and Communications Board. The motherboard contains 6 independent module slots,... More...	The 64E3 is a single slot, 6U VME, low-power/high-performance, high-density, multi-function I/O board. Five I/O module slots enable... More...	The 64EP3 is a single slot, 6U VME Single Board Computer (SBC) with configurable multi-function I/O. Powered by a choice of... More...


VXI Synchro/Resolver Simulatio...	3U cPCI Multi-function I/O & C...	3U cPCI Mult-ifunction I/O & C...
The 65CS4 is a multichannel, Embedded Grade single slot VXI Instrument Board. It incorporates up to four Synchro/Resolver Measurement... More...	The 75C5 is the newest generation of 3U cPCI Multi-function I/O and Communications Board. The motherboard... More...	The 75C3 is a 3U cPCI Multi-function I/O and Communications Board. The motherboard contains three independent module slots,... More...


6U cPCI D/S, DLV & Multifuncti...	VME D/S, S/D & Multifunction I/O	3U cPCI Multifunction I/O & Co...
The 78CS2 is a single slot Multi-function 6U cPCI Board for applications requiring Digital-to-Synchro/Resolver (D/S) stimulus output,... More...	The 64CS4 is a single slot Multifunction 6U VME Board for applications requiring Digital-to-Synchro/Resolver (D/S) stimulus output, as... More...	The 75C2 is a single slot, Multifunction 3U cPCI I/O and Communication Board. The mother board contains 2 independent module slots,... More...


PCI D/S, DLV & Multifunction I/O	PCIe Multifunction I/O	PCI Synchro/Resolver Measure &...
The 76CS3 is a Multi-function full-size PCI card for applications requiring Digital-to-Synchro/ Resolver (D/S) and... More...	The 79C3 is a PCIe (x1), multi-function I/O and communications card. The motherboard contains three independent module slots, each of... More...	The 76CS1 is a PCI Synchro/Resolver Measurement and Simulation Board that provides 8 S/D and 6 D/S Converter Channels, with accurate... More...


PCI Synchro/Resolver Measurement	Sensor Interface Unit (SIU6)	6U OpenVPX Multifunction I/O
The 76CS2 is a PCI Synchro/Resolver Measurement Board that provides 12 S/D Converter Channels, with accurate velocity outputs, that... More...	The SIU6 is a packaged, turn-key Embedded I/O System for data acquisition and distribution applications. It features a compact,... More...	The 67C3 is a single slot 6U OpenVPX (0.8” pitch) multi-function I/O and serial communications card. With VME, Gigabit Ethernet... More...


Sensor Interfact Unit (SIU-3)	3U OpenVPX Multifunction I/O
The SIU3-5 incorporates our single board computer, high density multi-function I/O and power supply products and offers... More...	The 68C3 is a single slot, 3U, OpenVPX (0.8” pitch) multi-function I/O and serial communications card. Gigabit Ethernet (Gig-E) and... More...