30 VA Synchro Booster Amplifier |
|
Intelligent Power Monitor |
|
Power Monitor, AC Powered, Fie... |
The 44PA1 is a military grade Synchro Booster Amplifier that delivers 30 VA over the frequency range of 47 Hz to 10 KHz and will drive... More... |
|
The NAI iPM is an advanced, compact, DSP based System Power Monitor providing a precise, instrument grade digital analysis of input... More... |
|
The YMA and YQA Power Monitors are used to monitor voltage, frequency and phase characteristics of single or three-phase power lines,... More... |
|
|
|
|
|
|
8 VA, 2Ch Synchro Booster Ampl... |
|
Power Monitor, Delta, AC Powered |
|
Power Monitor, AC Powered |
The 5761M is an all solid state military-grade design that incorporates two separate Synchro Booster Amplifiers with a common power... More... |
|
The PQA-D Delta Power Monitor is used to continuously measure voltage, frequency and phase rotation on three-phase delta power lines,... More... |
|
The PMA/PQA Power Monitors are used to monitor voltage, frequency and phase characteristics of single or three-phase power lines,... More... |
|
|
|
|
|
|
8 VA, 3Ch Synchro Booster Ampl... |
|
Synchro/Resolver to Linear DC ... |
|
Synchro/Resolver-to-Digital Tr... |
The Model 5702M is a military-grade self-contained, three channel, 8 VA Synchro Booster Amplifier. The use of field-proven circuits,... More... |
|
Model 4010 is a light weight, low profile Synchro/Resolver or Sine/Cosine to Linear DC Converter. It converts synchro, resolver or... More... |
|
The L1651 is a low profile, modular, solid state Synchro/Resolver-to-Digital Tracking Converter. It continuously transforms Synchro or... More... |
|
|
|
|
|
|
Synchro/Resolver-to-Digital Co... |
|
Fuel Flow and Torque Converter |
|
0.5A Solid State Flasher, DC I... |
Module A1663 is a 19.8 arc-second Synchro/Resolver-to-Digital Converter. Signal and reference inputs are transformer isolated, thus... More... |
|
This self-contained, remotely mountable Second Harmonic Fuel Flow Interface accepts data from a second harmonic fuel flow transmitter... More... |
|
The F580 is a solid-state, DC Input, 500mA Aircraft Warning or Position Light Flasher. This single channel unit is designed for... More... |
|
|
|
|
|
|
2.5A Solid State Flasher, DC I... |
|
4A Solid State Flasher, AC Input |
|
5A Solid State Flasher, DC Input |
The A738 is a solid-state, DC Input, 2.5A Aircraft Warning or Position Light Flasher. This single channel unit is designed for... More... |
|
The A915-8 is an all solid state, single channel 4A AC Aircraft Warning or Navigation Light Flasher. Low RFI/EMI, zero crossover... More... |
|
The A915 is a solid-state, single channel, 5A DC Aircraft Warning or Position Light Flasher. This unit is designed for airborne use... More... |
|
|
|
|
|
|
5VA Reference Supply, AC input |
|
5VA Reference Supply, DC input |
|
AC Powered AC Voltage Monitor |
The PS3800C is a Reference/Excitation Supply capable of delivering 5 VA of output power, and can drive several transducers in... More... |
|
The PS5410C-16 is a 5VA AC Reference Power Supply, available with many transformer isolated output voltages at different frequencies.... More... |
|
The VAA and VQA are AC Powered AC Voltage Monitors. These Voltage Monitors are used to monitor voltage characteristics of single or... More... |
|
|
|
|
|
|
AC Powered AC Voltage Monitor,... |
|
AC Powered Frequency Monitors |
|
AC Powered Phase Sequence Monitor |
The VMA is a field adjustable AC Powered AC Voltage Monitor. These Voltage Monitors are used to monitor voltage characteristics of... More... |
|
The FAA and FQA are AC Powered Frequency Monitors used to de-energize or activate alarm devices when the line frequency departs from... More... |
|
The PAA and PLA are AC Powered Phase Sequence Monitors which protect Three Phase Loads from damage due to Phase Reversals or Phase... More... |
|
|
|
|
|
|
AC voltage monitor, 3-phase De... |
|
AC voltage monitor, 3-phase De... |
|
ARINC 429 (Label 162) to Synch... |
The DAA is an AC Powered Voltage Monitor. It is used to continuously measure voltage on three-phase Delta power lines, allowing normal... More... |
|
The DMA is a field adjustable AC powered Voltage Monitor. It is used to continuously measure voltage on three-phase Delta power lines,... More... |
|
The Model 44SM7-2 is a self contained, remotely mountable module that accepts low speed ARINC 429 (Label 162, Bearing heading) data.... More... |
|
|
|
|
|
|
ARINC 429 (Label 314) to Synch... |
|
DC Powered AC Voltage Monitor |
|
DC Powered Drop-Out Time Delay... |
The Model 44SM7-1 is a self contained, remotely mountable module that accepts low speed ARINC 429 (Label 314, True heading) data. The... More... |
|
The VAD and VQD are DC Powered AC Voltage Monitors. These Voltage Monitors are used to monitor voltage characteristics of single or... More... |
|
The DO is a DC powered, Delay On, Drop-Out Time Delay Relay. Upon application of operating power, the relay contacts transfer... More... |
|
|
|
|
|
|
DC Powered Frequency Monitors |
|
DC Powered Phase Sequence Monitor |
|
DC Powered Pull-In Time Delay ... |
The FAD and FQD are DC Powered Frequency Monitors used to de-energize or activate alarm devices when the line frequency departs from... More... |
|
The PAD and PLD are DC Powered Phase Sequence Monitors which protect Three Phase Loads from damage due to Phase Reversals or Phase... More... |
|
The DMN1 DC Powered Pull-in Time Delay Relays are designed for rugged Military and Aerospace applications where precise time intervals... More... |
|
|
|
|
|
|
DC Voltage Monitor, AC Powered |
|
DC Voltage Monitor, DC Powered |
|
Fuel Flow Converter, Second Ha... |
The VDA is an AC Powered DC Voltage Monitor, which provides alarm or power disconnect when the voltage is beyond pre-determined limits. More... |
|
The VDD is a DC Powered DC Voltage Monitor,which provides alarm or power disconnect when the voltage is beyond pre-determined limits. More... |
|
This self-contained, remotely mountable Second Harmonic Fuel Flow Interface accepts data from a second harmonic fuel flow transmitter... More... |
|
|
|
|
|
|
Power Monitor, AC or DC Powered |
|
|
|
|
The model 109 Power Monitors are used to monitor voltage, frequency and phase characteristics of single or three phase power lines,... More... |
|
|
|
|
|
|
|
|
|