Products -> LVDT / RVDT Measurement
 

LVDT / RVDT Measurement

For Multifunction Embedded Boards, the LVDT Module provides four measurement channels, programmable with 2, 3 and 4 wire capability. Typically the primary is excited by an AC source, causing a magnetic flux to be generated within the transducer. Voltages are induced in the two secondaries, with the magnitude varying with the position of the core. Usually, the secondaries are connected in series opposition, causing a net output voltage of zero when the core is at the electrical center. When the core is displaced in either direction from center the voltage increases linearly either in phase or out of phase with the excitation depending on the direction.

Two common Methods of Interfacing LVDT to Converter:
• Primary as reference (Two-wire system) - This method of connection converts the widest range of LVDT sensors and is the most sensitive to excitation voltage variations, temperature and phase shift effects.
• Derived reference (Three/four-wire LVDT) - The LVDT is again excited from the primary side, but the converter reference is the sum of A + B that has constant amplitude for changing core displacement. This system is insensitive to temperature effects, phase shifts and oscillator instability and solves the identity (A-B) / (A+B)

LVDT (Module L*) - Four LVDT Measurement Channels (2, 3 or 4 Wire)

 

VME Multi-function Next Genera...

6U cPCI Multifunction I/O & Co...

PCI Multifunction I/O & Commun...

6U VME Multi-function I/O & Communications

The 64C3 is the next generation single slot, 6U VME, low-power/high-performance, multi-function I/O board. Configured with up to six... More...

6U cPCI Multifunction I/O & Communications

The 78C2 is a 6U cPCI Multifunction I/O and Communications Board. The “mother board” contains 6 independent module slots, each of... More...

PCI Multifunction I/O & Communications

The 76C2 is a Multifunction PCI I/O and Communications Board. The “mother board” contains 3 independent module slots, each of which... More...


VME Multi-function I/O & Commu...

VME, Multi-function, High Dens...

VME, SBC w/Multi-function Comm...

VME Multi-function I/O & Communications

The 64C2 is a single slot, 6U VME Multi-function I/O and Communications Board. The motherboard contains 6 independent module slots,... More...

VME, Multi-function, High Density I/O

The 64E3 is a single slot, 6U VME, low-power/high-performance, high-density, multi-function I/O board. Five I/O module slots enable... More...

VME, SBC w/Multi-function Communication & I/O

The 64EP3 is a single slot, 6U VME Single Board Computer (SBC) with configurable multi-function I/O. Powered by a choice of... More...


3U cPCI Multifunction I/O & Co...

6U cPCI D/S, DLV & Multifuncti...

VME D/S, S/D & Multifunction I/O

3U cPCI Multifunction I/O & Communications

The 75C3 is a 3U cPCI Multifunction I/O and Communications Board. The “mother board” contains 3 independent module slots, two of which... More...

6U cPCI D/S, DLV & Multifunction I/O

The 78CS2 is a single slot Multi-function 6U cPCI Board for applications requiring Digital-to-Synchro/Resolver (D/S) stimulus output,... More...

VME D/S, S/D & Multifunction I/O

The 64CS4 is a single slot Multifunction 6U VME Board for applications requiring Digital-to-Synchro/Resolver (D/S) stimulus output, as... More...


3U cPCI Multifunction I/O & Co...

PCI D/S, DLV & Multifunction I/O

PCIe Multifunction I/O

3U cPCI Multifunction I/O & Communications

The 75C2 is a single slot, Multifunction 3U cPCI I/O and Communication Board. The mother board contains 2 independent module slots,... More...

PCI D/S, DLV & Multifunction I/O

The 76CS3 is a Multi-function full-size PCI card for applications requiring Digital-to-Synchro/ Resolver (D/S) and... More...

79C3 PCIe Multifunction I/O

The 79C3 is a PCIe (x1), multi-function I/O and communications card. The motherboard contains three independent module slots, each of... More...


Sensor Interface Unit (SIU6)

PCI LVDT/RVDT Measurement & Si...

6U OpenVPX Multifunction I/O

Sensor Interface Unit (SIU6)

The SIU6 is a packaged, turn-key Embedded I/O System for data acquisition and distribution applications. It features a compact,... More...

PCI LVDT/RVDT Measurement & Simulation

The 76CL1 is a PCI LVDT/RVDT Measurement and Simulation Board that provides eight LVDT/RVDT Measurement Channels and six 3/4-Wire (or... More...

6U OpenVPX Multifunction I/O

The 67C3 is a single slot 6U OpenVPX (0.8” pitch) multi-function I/O and serial communications card. With VME, Gigabit Ethernet... More...


PC/104 LVDT/RVDT Measurement

Sensor Interfact Unit (SIU-3)

3U OpenVPX Multifunction I/O

PC/104 LVDT/RVDT Measurement

The 73LD4 is a PC104 compliant stack-through module that offers six (6) separate transformer isolated Programmable... More...

rugged subsystem

Taking advantage of our single board computer, high density multi-function I/O and power supply products, the SIU3-5 offers... More...

3U OpenVPX Multifunction I/O

The 68C3 is a single slot, 3U, OpenVPX (0.8” pitch) multi-function I/O and serial communications card. Gigabit Ethernet (Gig-E) and... More...