6U cPCI D/S, S/D, I/O & Comm Board - 78CS2

Model 6U cPCI 78CS2

6U cPCI D/S, S/D, I/O & Comm Board - 78CS2

Five I/O and communication function module slots—
A variety of modules to choose from

 

NAI’s 78CS2 is a 6U cPCI multifunction I/O and communication board designed for applications requiring Digital-to-Synchro/Resolver (D/S) stimulus output, as well as I/O and communication functions. This board contains five independent function module slots. The board can be configured for 10 D/S channels, or for D/S in combination with I/O and communication modules. Additional enhancements include FIFO data buffering for select modules. Using multiple DSPs, the enhanced motherboard enables higher processing power and dedicated pre-processing control for each module.

By eliminating the need for multiple, specialized, single-function boards, this unique design increases packaging density, saves enclosure slots, and reduces power consumption. The 78CS2, a low-power/high-performance board, is ideally suited for rugged defense, industrial, and commercial applications.

Preexisting, fully-tested functions can be quickly and easily combined in an unlimited number of ways. Each I/O function has dedicated processing, unburdening the system Single Board Computer (SBC) from unnecessary data management overhead.

The 78CS2 includes Software Support Kits (SSKs) for multiple operating systems. In addition, SSKs are supplied with source code and board-specific library I/O APIs to facilitate system integration.

I/O Product Reference Guide

I/O Product Configuration Wizard

Features:

  • Support for 5 independent, intelligent function modules
  • Up to 10 D/S channels with:
    • On/off output capability
    • Individual reference inputs per channel
    • Rotation with start and stop angles
  • High efficiency D/S design requires less current from the power supply & substantially reduces heat generated on the CCA
  • FIFO data buffering for A/D, D/A, S/D, and LVDT functions
  • Programmable multi-speed ratio between 2 and 255 for S/D and D/S functions
  • Short circuit protection (standard); one of the outputs can be grounded without effecting performance
  • On board 5 VA programmable reference supply (optional)
  • Control via PCI Bus or Gigabit Ethernet (Gig-E) interface
  • Connections via front panel, rear panel, or both
  • Automatic Background Built-in-Test (BIT) (module dependent)
  • Software Support Kits (SSKs) and drivers available
  • Commercial and rugged models
  • Operating temperature: 0° C to 70° C commercial, -40° C to +85° C rugged
 
Document DownloadsDate
78CS2 Data Sheet
07/13/2015
78CS2 Specifications
02/01/2016
78CS2 Operations Manual
Complete manual that includes all available function modules.
02/01/2016
78CS2 Custom Operations Manual
Abbreviated manual that includes only function modules selected in the part number.
02/01/2016
1553 Module (Nx) Programmer's Reference Guide
12/03/2012
Application Note: User Guide for NAI 2nd Generation Digital to Synchro-Resolver Converters
02/10/2011
E7 Module Users Guide Addendum
11/30/2011
Environmental Specifications for cPCI and VME cards
06/04/2010
NAI Ethernet Interface for Embedded IO Boards Specification
04/10/2015
Quick Start Software Guide
02/13/2009
News ItemsDate
All Discretes are not Created Equal
No longer just the basic On/Off "workhorse," Discrete I/O interfaces are standing up to the rigors of modern control systems...
11/11/2011
Board and Box Level Systems Face SWaP Design Challenges
Reducing size, weight and power of military systems remains a challenge, especially when shrinking budgets are putting pressure on costs.
02/28/2014
Distributed I/O Data and Processing Architectures
Modern military platforms continue to place an ever greater reliance on electronics for their operation.
09/14/2010