300W (Watt) AC/DC Power Supply, VME

Model AC/DC 56SQ2

The 56SQ2 is a 300 Watt, AC/DC Power Supply with up to 5 outputs for VME and General Purpose applications. It provides full output power at +85°C (measured at card edge / wedgelocks). It is designed to plug into a standard 6U rack (utilizing 2 card slots). An Onboard Micro-Controller allows for design flexibility.

Power Supply Reference Guide

Power Supply Configuration Wizard

Features:

  • Switching Power Supply – Low Noise
  • Designed and Manufactured Per NAVMAT/NAVSO P-3641 Guidelines
  • 6U Plug-in Design
  • Standard VME Outputs plus Standby; 300W Typical
  • Input Transient Protection per MIL-STD-1399 & 704
  • EMI Filtering Designed to MIL-STD-461E
  • Optional 3 Phase input
  • Current Share
  • Holdup Time
  • Remote Error Sense (all outputs except standby
  • Extensive Signaling Options (including ANSI/VITA)
  • BIT
  • Optional Over-Temperature Monitoring and Shutdown
  • Current Limiting
  • Short Circuit Protection
  • OverVoltage Protection
  • Remote Turn On/Off

 
Document DownloadsDate
56SQ2 VME Power Supply Specification
05/14/2014
Power Conversion
AC/DC Power Conversion
VME Power Conversion
 
Miscellaneous
N/A
N/A
  • 64G5 - Six I/O and communications function module slots— Over 40 different modules to choose from Configure to Customize The 64G5 is NAI's latest generation...
  • 55PQ2 - The 55PQ2 is a rugged, conduction-cooled 150 watt DC/DC converter with a 28Vdc input. It has standard outputs which address the needs of VME & cPCI systems....
  • 64ARM1 - 6U VME SBC with Six I/O function module slots— Over 40 different modules to choose from Configure to Customize The 64ARM1 is a 6U VME ARM Cortex™-A9...
  • 64PPC1 - 6U VME SBC with Six I/O function module slots— Over 40 different modules to choose from Configure to Customize The 64PPC1 is a 6U VME Freescale™...
  • 64INT2 - 6U VME SBC with Six I/O function module slots— Over 40 different modules to choose from Configure to Customize The 64INT2 is a 6U VME Intel® Core™...
  • 64E3 - The 64E3 is a single slot, 6U VME, low-power/high-performance, high-density, multi-function I/O board. Five I/O module slots enable integrators to mix and match...
  • 55PQ1 - The 55PQ1 is a rugged, conduction-cooled, 180 watt DC/DC converter with a 28Vdc input. It has standard outputs which address the needs of VME & cPCI systems....
  • 64C3 - The 64C3 is NAI's third generation single slot, 6U VME, low-power/high-performance, multi-function I/O board. Six module slots enable integrators to...
  • 64C2 - The 64C2 is NAI's second generation, single slot, 6U VME Multi-function I/O and Communications Board. The motherboard contains six independent module...
  • 64CS4 - The 64CS4 is a single slot Multi-function 6U VME Board for applications requiring Digital-to-Synchro/Resolver (D/S) stimulus output, as well as I/O and Communication...
  • 56SQ1 - The 56SQ1 is a high power-density, low profile, 430 watt AC/DC Power Supply with up to 5 outputs for VME and General Purpose applications. It provides full output...
  • 55U91-01 - The 55U91-01 is a rugged, 614 watt, conduction-cooled, DC/DC converter with a 28Vdc input. It has 9 outputs which address the needs of VME & cPCI systems....
  • SIU6 - Configure with up to 12 I/O and Communications Function Modules— Over 40 different modules to choose from Configure to Customize The SIU6...
  • 78C2 - The 78C2 is a 6U cPCI Multifunction I/O and Communications Board. The motherboard contains six independent module slots, each of which can be populated with...
  • 78CS2 - The 78CS2 is a single slot Multi-function 6U cPCI Board for applications requiring Digital-to-Synchro/Resolver (D/S) stimulus output, as well as I/O and Communication...
  • 64TR1 - This single slot card contains two 60/400 Hz Synchro output transformers and two reference input transformers, and is specifically designed to interface with VME-64CS1/CS3-84CSP8-57.
  • 64RT3 - This Transition card is for use in VME systems that require reliable interconnection between the P2 and P0 connectors to the outside world. P0 & P2 are terminated...
  • 64RT2 - The 64RT2 Rear Transition Card is for use in VME systems that require reliable interconnection between the P2 and P0 connectors to the outside world. P0 & P2 are...
  • 44KS2 - The 44KS2 is a VME, DC/DC converter which converts existing system +5Vdc to +3.3Vdc at 75 watts, addressing the need for the addition of +3.3vdc in a VME system....
  • 64PS1 - The 64PS1 is a rugged, conduction-cooled, DC/DC converter with a 28Vdc input. It has a single output which provides full output power of 600 watts at +85°C...