12-Port Ethernet Switch (H2 Module)

12-Port* 10/100/1000Base-T Unmanaged Switch (H2 Module)
 

Standards:

  • IEEE 802.3ab (1000Base-T Gig-E)
  • IEEE 802.3u (100Base-TX Fast Ethernet)
  • IEEE 802.3i (10Base-T Ethernet)
  • IEEE 802.3x (Flow control/full and half duplex)


Features:

  • Broadcom® 53312S
  • Rear I/O Support
  • Non-Blocking Gigabit Ethernet fully integrated switch fabric with 4Mb packet buffer memory
  • Integrated MACs (IEEE 802.x compliant) with support for 9600-byte jumbo frames
  • High-performance look-up engine with support for up to 8K unicast MAC address entries
  • Automatic learning and aging tags
  • IPv4 and IPv6 traffic class support
  • Up to 12 Ports available for external Ethernet communication/connectivity
  • 2 Ports (of 12) for motherboard and/or processor communication/connectivity (if supported)
  • Port segregating/partitioning options are available (i.e. separate 6/6 Ports for 2x independent networks)
  • For layer 3 support, please contact factory.


* dependent upon platform

Power: +5Vdc @ 1200 mA. (typ. quiescent. Add 50 mA per active port
(est. typ. full duty cycle)
Ground: Isolated signals
Weight: 2oz. (56g)

 

 

 

Function module(s) featured in products below:


ModelBoard TypeBoard ArchitectureFunction Module SlotsEthernetMaster / Slave
75D4-H23U cPCIBF533 / Cyclone® III1 double width module occupied by H2 switch12 x GBBoth 
ModelBoard TypeProcessorFunction Module SlotsMaximum MemoryMaximum StorageVideo OptionsEthernetAvailable O/S
68ARM13U OpenVPX SBCXlilinx® Zynq 7015 & 7016 w/Dual Core ARM® Cortex®-A9 @800MHz3512 MB DDR3 SDRAM32 GB SATAII NAND FlashN/A2 x GBWind River®, VxWorks® and Xilinx® PetaLinux OS Support
ModelPhotoBoard TypeDimensions w/Connectors (w x h x d)Volume w/Connectors (in3)Weight / lbs (fully populated)Est. Typ. Power Dissipation (W)# of Board SlotsFunction Module SlotsMax I/O PinsEthernet
RESIU31 Gig-E Switch4.71" x 2.35" x 8.71"96.41<5.010 to 14N/AN/AN/AUp to 12x GB